How do I connect my Alexa to a new WiFi?

To connect Alexa to a new WiFi network, open the Alexa app and tap Devices. Then select Echo & Alexa and choose the Alexa device you want to connect to a new WiFi network. Finally, tap Change next to WiFi Network and enter the WiFi password for that network. Open the Amazon Alexa app.

How do I change the WiFi on my echo?

Update the Wi-Fi Settings on Your Echo Show
  1. Say, “Go to settings,” or swipe down from the top of the screen and select Settings.
  2. Select Network.
  3. Select your Wi-Fi network and follow the prompts on the screen.

Why won’t Alexa connect to my new WiFi?

Make sure that your Echo device is within 30 feet (or 10 meters) of your wireless router. If other devices can’t connect, restart your Internet router and/or modem. While your network hardware restarts, unplug the power adapter from your Echo device for 3 seconds, then plug it back in.

Why isn’t my Alexa pairing?

Make sure that your Bluetooth device is fully charged and close to your Echo device when pairing. If you’ve previously paired your Bluetooth device, remove your paired Bluetooth device from Alexa. Then try pairing it again.

How do I reset my Amazon Echo 1st generation?

Just unplug the power adapter from the device or the outlet and then plug it back in. To reset your device to its factory settings: Use a paper clip (or similar tool) to press and hold the Reset button. Wait for the light ring to turn off and on again.

How do you reset Alexa?

You can reset your Echo device using the Alexa app on your iOS or Android smartphone.
  1. Go to Devices.
  2. Tap the Echo & Alexa icon at the top.
  3. Choose the speaker you want to factory reset.
  4. Scroll down to Factory Reset and tap it.
  5. Confirm you want to reset.

Where is the reset button on Alexa?

Video: This is the best smart speaker

First-generation Amazon Echo (and Dot): Locate the reset button on the bottom of the Echo speaker. Then use the end of a paper clip to press and hold the button for 5 seconds. The light ring on the device will turn orange and spin, signifying that it properly reset.

Can I reset Amazon Alexa without app?

To reset your device to its factory settings:
  1. Press and hold the Action button for 25 seconds. The light ring will pulse orange, then turn off.
  2. Wait for the light ring to turn back on and turn blue. The light ring then turns orange again and the device enters the set up mode.

What to do when Alexa stops working?

If calling on Alexa isn’t working, there are a few troubleshooting steps to try.
  1. Make sure your contact information is correct.
  2. Check your Echo’s internet connection.
  3. Restart the Alexa app on your phone.
  4. Update the Alexa app on your iPhone or Android.
  5. Check what Alexa heard.

Why is Alexa flashing green?

A pulsing green light indicates an incoming call. A spinning green light means you’re currently on a call or an active Drop In. A pulsing yellow light is telling you that you have messages in your inbox. You can say, “Play my messages” or “Check my notifications” for more information.

How do I fix an unresponsive device Alexa?

Restart your Alexa device and your smart home device. Disable and re-enable the skill for your smart home device in the Alexa app. Disconnect your smart home device using the Disable option for your device in the Alexa app. Then, re-enable your smart home device again.

Why is my Alexa light unresponsive?

Restart your Alexa device and your smart home devices. Disable and re-enable the skill for your smart home devices in the Alexa app.

Why is my smart light not connecting?

Make sure the Wi-Fi network is a 2.4 GHz network. The Smart Wi-Fi Light will not connect to a 5 GHz network. If your Smart Wi-Fi Light is already on the right frequency, make sure that your phone is not using a VPN app in the background.

Why can’t I connect my smart plug to WIFI?

The most likely cause of not being able to connect to the wifi with your smart plugs is the app that you’re using, and your phone’s settings. Ensuring that your Bluetooth, wifi and your location settings are on is the first step to fixing the problem.

How do I change my WiFi to 2.4 GHz?

Using the Admin Tool
  1. Connect to your WiFi network.
  2. Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number.
  3. Select Save Settings.

How do I reconnect my smart plug to WiFi?

Change Smart Plug Wi-Fi Network
  1. Open C by GE app.
  2. Go to your Plug Device Details page by tapping on the device in the app.
  3. Tap edit (for iOS) or the three dots (for Android) in the top right corner.
  4. Select “Update Wi-Fi Network”
  5. Select new Wi-Fi network (you may be prompted to put in a password)
  6. Once Wi-Fi connects to your Smart Plug, you’re all set!

How do I reset my Smart Life WiFi?