What’s the best way to cut cinder block?

The most efficient way is to use a circular saw to slice through the tough cinder block. If you’re less concerned with making a clean, accurate cut, you could also try splitting the block with a hammer and chisel.

How do you cut cinder blocks in half?

Can you cut concrete block with a Sawzall?

Cinder blocks are a common building material. Made from cast concrete, cinder blocks are hard and durable. One of the easiest ways to cut a cinder block is with a reciprocating saw that has a diamond-coated blade.

Can you cut concrete block with a grinder?

Tip. Cutting a concrete block outside reduces the amount of cleanup required. An angle grinder equipped with a concretecutting blade makes straight sharp-edged cuts in a concrete block’s surface.

How do you cut concrete blocks by hand?

How do you cut cinder blocks by hand?

If your cut doesn’t need to be exact, use a cold chisel and hand sledge to cut the concrete. Score the length of the cut three or four times with the chisel. A circular saw with a masonry blade can also be used to either score or completely cut through the block.

How do you remove a single cinder block?

Cement blocks are shaped like an 8 so they are solid at the ends and the middle but otherwise hollow. Start breaking it about 1/4 of the way in from an end, a couple good whacks with a hammer should break thru the face into the hollow core, then just go at it with a masonry chisel working your way to the end.

What is the best blade for cutting concrete?

Diamond saw blades are typically the best choice when it comes to making clean, professional cuts in concrete.

Can a carbide blade cut concrete?

Reciprocating saw blade manufacturers label both diamond and carbide coated blades as “concrete cutting blades.” Diamond blades are typically more expensive than carbide blades.

How do you cut concrete block without a saw?

What can I cut concrete blocks with?

Power Saw and Concrete Blade

For a larger project or more accurate cuts, a circular saw with a concrete blade is a good option. Mark the cut and clamp the stone or paver to a stable work surface. Cut the block, allowing the saw and blade to do most of the work — don’t apply too much force.

Are concrete blocks easy to cut?

Cutting bricks or blocks cleanly and accurately takes a little practice, but once you have the knack you should be able to chop them in half quickly and easily. There are many occasions when you may need to cut bricks or blocks in half or trim them to fit particular areas of a wall or pier.