Can I install my own fiberglass pool?

Since 2001 we at River Pools have installed over 1,000 fiberglass swimming pools. However, fiberglass pools are a perfect Do-It-Yourself project for anyone with basic excavation and plumbing experience—and, of course, time.

How difficult is it to install a fiberglass pool?

The process of installing a fiberglass pool is not that difficult. Most mechanical people after a glance over some installation pictures have a basic handle on it. Dig, set, backfill, form and pour the concrete. It took three 16 hour days to install my first pool and I earned every bit of it.

How do you install a Fibreglass pool?

Fibreglass Swimming Pool Installation
  1. Step 1 – Assessing the Site. A fibreglass swimming pool shell is a large object.
  2. Step 2 – Laying Out the Swimming Pool.
  3. Step 3 – Excavating the pool.
  4. Step 4 – Setting the base.
  5. Step 5 – Craning and Setting the Swimming Pool.
  6. Step 6 – Backfilling.
  7. Step 7 – Plumbing the pool.

What goes under a fiberglass pool?

Clean crushed gravel is the perfect base for a fiberglass pool because as long as the soil under the base is solid the pool will never move…

Do fiberglass pools break?

Fiberglass pools have a gel coating that can develop hairline cracks over time. These cracks typically only penetrate the gel coat and do not affect the pool’s structural integrity, nor do they indicate leaks. If you see blisters as well as cracks, this is a sign that the gel coating was applied too thinly.

Why fiberglass pools are bad?

Here are the potential Cons of fiberglass pools: Poor Installation — Because fiberglass pools are delivered as a pre-manufactured shell, it’s important that your contractor follows proper procedure when installing the pool. According to SwimmingPools.com, digging the hole is the easy part.

Why do Fibreglass pools break?

Fibreglass shells rely on the water pressure in the pool to exert force against the soil around them in order to maintain their structure. If there is no water pressure in the pool, the soil around the pool can push against the fibreglass shell and cause it to crack.

Is a fiberglass pool worth the money?

Both are considered top-tier pool building materials. That said, in terms of total cost of ownership, it’s worth noting that maintaining a fiberglass pool is generally cheaper. That’s because fiberglass is more algae resistant, and therefore could save you money on chemicals over the life of the pool.

How long do Fiberglass pools last?

Fiberglass Pool: Many fiberglass pools last 30 years or more. But, it often depends on the quality of the manufacturer. With a Leisure Pool, you can expect your pool to last a lifetime!

Does a fiberglass pool increase home value?

Considering all these factors, in general, fiberglass pools do add value to a home. The National Association of Realtors has said that a concrete or fiberglass pool may add roughly 5% to a home’s value, but again, this number can vary.

Are Viking Fiberglass Pools good?

In terms of sheer numbers, Viking has a definite advantage, with many more models to choose from. In terms of elegance and classiness though, Trilogy dominates when one looks at such models as the Hyperion and the Regalus, which are in my opinion two of the classiest large pool designs in the fiberglass pool industry.

Do fiberglass pools look cheap?

So yes, fiberglass pools can look cheap, especially older ones, but they don’t have to. When properly built and properly installed, a fiberglass pool will be a thing of beauty.

How long do San Juan Fiberglass Pools last?

No other type of swimming pool compares when it comes to durability. While concrete and vinyl liner pools need repair or replacement every 5 to 10 years, a fiberglass pool can easily last for 25 years with proper maintenance.

How long does it take to install a fiberglass pool from start to finish?

It only takes about 3–6 weeks to install a fiberglass pool. This includes the pool itself, the patio, and landscaping. You can actually swim in your pool by the end of day 2!

How often does a fiberglass pool need to be resurfaced?

Resurfacing/refinishing every 10–15 years.

Can you put a swim up bar in a fiberglass pool?

Semi-Inground Fiberglass Pool

You can also incorporate seating, a swim–up bar, and elements of your landscaping or patio.

Can you put a waterfall on a fiberglass pool?

Fiberglass Swimming Pool Water Features: Waterfalls, Bubblers, & Fountains. Once you‘ve decided to enhance your backyard with a fiberglass pool, you‘ll also have the option of adding inground pool water features like waterfalls, bubblers, fountains, and more.

How deep do Fiberglass pools go?

Most fiberglass pools tend to be 3 ½’ to 5 ½’ deep on pools that are 27′ long and smaller. On pools that are 27′ to 35′ long the depths range from 3 ½’ to 6 ½’. On pools that are 35′ to 44′ long the depths can go anywhere from 3 ½’ to 8 ½’ deep.